Brand Name: Soloon
Model Number: Fan Coil Actuator and Valve
Place of Origin: Beijing, China
S6056/57 Fan Coil Actuator and Valve
The S6056 electric spring return actuator has 105N minimum seating force in a compact, easy-to install package. The on/off actuator provides two control positions (open and closed).
The S6057 brass valves are primarily designed to regulate the flow of water in response to the demand of a controller in zone and fan coil applications. They can be used in combination with the on/off series of S6056 fan coil actuators.
The valves are available in 2-way N.C. (Normally Closed) or 3-way configurations.
When the power is on the actuator motor drives the other parts, overcoming resistance from the spring to push the valve stem downwards. When the power is off the return spring overcomes pressure from the medium and pushes the stem to the closed position.
The actuator drives the stem downwards and the valve core overcomes resistance from the stainless spring. It moves away from the valve seat, opening the normally closed port.
Mounting (S6056-S6057 combination)
• The fluid direction must be the same as the direction indicated by the arrow on the body.
• The mounting position is upright to horizontal in order to avoid water dripping inside.
• The valve must be connected with the water pipe correctly.
• Never use the actuator as a lever to move the valve body.
• The actuator must not be covered with insulating material.
• Sufficient clearance must be allowed for maintenance or detaching.
Warning
• Manual operation should not be forced to avoid damage to the actuator.
• The water quality should meet VDI-2035 or similar requirements for HVAC applications. Other media for the valve must be approved by Soloon Electronics.
• The electrical supply to the actuator should be turned off when repairs
are carried out in order to avoid possible damage to the equipment, personal injury or shock.
• Do not touch or disconnect wires when the power is on.
Model |
S6056 |
Action |
On/off |
Motor |
Synchronous stall motor |
Operating Voltage |
AC220V 50/60Hz |
Power Consumption |
7VA |
Acting Force |
105N±10%(24Lb±10%) |
Stroke Range |
3mm~5mm |
Full Stroke Time “on” |
Approx. 10s |
Full Stroke Time “off” |
Approx. 5s |
Protection |
IP40 |
Ambient Temperature |
Operation: +2 ~ 60℃, non condensing Storage: -20 ~ 65℃, non condensing |
Shipping Weight |
496g |
Model |
S6057-2XXX 2-way (normally closed) S6057-3XXX 3-way |
|
|||
Body rating |
PN16 (1.6Mpa or 232psi ) Maximum pressure resistance 300psi |
|
|||
Medium |
Hot or Cold Water for HVAC |
|
|||
Body size nominal |
015 (1/2") |
020 (3/4") |
025 (1") |
|
|
Selectable Kv for 2-way |
0.63 1.0 1.6 |
1.6 2.5 3.5 |
2.5, 4.0 5.5 |
|
|
Selectable Kv for 3-way |
1.6 |
3.5 |
5.5 |
|
|
Shipping Weight for 2-way |
263g |
414g |
609g |
|
|
Shipping Weight for 3-way |
300g |
469g |
691g |
|
|
Body Connection |
NPT or Parallel BSP (tapered) |
|
|||
Action |
On/off |
|
|||
Nominal Stroke |
3.0mm |
|
|||
Materials |
Body: brass Plug: synthetic rubber EPT Packing ring: O-ring EPT Stem: AISI 303 stainless steel Spring: AISI 302 stainless |
|
|||
Medium temp. range |
2~105℃ |
|
|||
Ambient Temp. Range |
2~60℃ |